| |
Bimmian.com Aluminum E-Brake Handle |
INSTALLATION DIFFICULTY: 1/5
Easily installed, these handbrakes are the perfect way to enhance the silver, titanium or chrome parts of your cars interior. (ie: dash trim, gauge rings, aluminum pedals, shift knobs, door handle).
Machined out of aluminum, these e-brake handles are custom made for your vehicle with care and precision.
All our e-brake handles are machined out of aluminum for perfect fitment. Our silver e-brake handles are brushed, and our titanium handbrakes are anodized with a matte finish. All our handbrakes are accented with a chromed aluminum ring at the tip and base.
Our chromed e-brake handle has a fully chromed body over semi-fine machined aluminum, and is accented with a matching chrome aluminum ring at the tip.
The 3 bolts, instructions, the allen key and zip tie are all provided with each e-brake handle.
For a great match, make sure you check out our other products available in the same finishes by clicking below.
No permanent modifications are necessary to your vehicle to make the installation of this product possible.
NOTE: For E90, E92, E60, E63, E65, E70, E71 models: If you purchase a handbrake with a round end as opposed to a squareish end, it will still fit however, the hole in your boot is larger than our e-brake takes up. You will be required to fold over the bottom part of the e-brake boot as you install it. This can be done at the bottom so it is not visible when it is installed.
NOTE: You will be required to remove your original e-brake handle in order to install these replacements. Your original handle should slide right off once you remove the zip tie holding it in place. If you find it difficult to remove, you may need to run some lubricant (such as WD-40) down the shaft to loosen the handle. If it is still difficult to remove wiggle it back and forth as you pull up. Remember that the handle will come of this way, there is nothing else holding it on, it just may take some strength and patience.
NOTE: These e-brake handles replace only the handle itself. Your original e-brake button will remain in place.
|
| |
|
|
|
| |
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
|                   
|
|
| BEFORE and AFTER |
     |
| PRICING |
|
ITEM |
PRICE |
IN STOCK |
SKU |
| SPECIAL: Purchase any handbrake and receive a $10 discount! | | For Any BMW |
| Black Carbon Fiber Finish - Thicker Bimmian-Design |
$ 95 $85 |
 |
BRAAAAFBY |
| Brushed Silver Finish - Thicker Bimmian-Design |
$ 65 $55 |
 |
BRAAAASBY |
| Chrome Finish - Original Style |
$ 65 $55 |
 |
BRAAAACYY |
| Chrome Finish - Thicker Bimmian-Design |
$ 65 $55 |
 |
BRAAAACBY |
| Copper Finish - Original Style |
$ 65 $55 |
 |
BRAAAAWYY |
| Gun Metal Finish - Thicker Bimmian-Design |
$ 65 $55 |
 |
BRAAAAUBY |
| Powdercoat Black Finish - Thicker Bimmian-Design |
$ 65 $55 |
 |
BRAAAABBY |
| Titanium Look Finish - Original Style |
$ 65 $55 |
 |
BRAAAARYY |
| For E82,E92,E90,E60,E63,F01,E70,E71,E83,E89,E86 |
| Black Carbon Fiber Finish - New! Performance Edition |
$ 95 $85 |
 |
BRAAAAFSY |
| Brushed Silver Finish - New! Performance Edition |
$ 65 $55 |
 |
BRAAAASSY |
| Polished Chrome Finish - New! Performance Edition |
$ 65 $55 |
 |
BRAAAACSY |
| Silver Carbon Fiber Finish - New! Performance Edition |
$ 95 $85 |
 |
BRAAAAVSY |
|
| YOU MAY ALSO ENJOY... |
|
|
| . |
|
|