Carbon Fiber Vinyl Door Sills from bimmian.com
Give your BMW door sills a Carbon Fiber Finish with this easy to install overlay kit!
Features and Benefits Of This Product
At just a fraction of the cost of putting real carbon door sills you can enjoy the same look with Bimmian.com Door Sills that you overlay on top of your original sills. Not need to remove what's already there.
Made from Carbon Vinyl that reacts to light like real carbon fiber.
What Its Made From
Each kit comes with 2 or 4 pieces that cover a specific part of the door sills for an attractive appearance. (2 door models come with 2 sills and 4 door models come with 4 sills)
See the parts description for more details or refer to the images above.
When installing it is very important to strip any rubber or plastic shine solvents that were put onto the door sills, along with any oil and dirt. This can be done with rubbing alcohol. If this is not done then the parts will not stick correctly. We recommend using a hairdryer or heat gun to adhere the material to sills. The material's glue is activated by heat all will stick better. Heat will also soften the material during installation. Just apply heat, push out any bubbles to the edges and you're done.
THIS KIT MUST BE APPLIED WITH SOAPY WATER:
Most pieces need to go on with soapy water so that they can be easily moved into place and so that they will not stretch if lifted for realignment. Put soapy water on the application surface AND on the back of the piece itself. Once you are happy with the placement, gently press out the water with a cloth and use a hairdryer to dry up the excess water. If you find a portion is not sticking correctly it means there is still water under that piece. Simply press out and collect the water.
DO NOT PULL OR STRETCH THE MATERIAL:
Be very careful when peeling off or realigning not to stretch the material or it will not fit correctly. This is especially important with narrow or long pieces. If the piece stretches it will most likely happen along a long thin area leaving you with too much material somewhere in the middle of the pattern. If this occurs make a cut in the material with scissors and fold over the two edges you just created by cutting the one piece. Cut away any overlap and press down firmly. Installation Difficulty: SIMPLE
- No Tools, Anyone Can Install
This Product Fits (see ORDER HERE tab above for clearer detail)
E46 - BMW 3 Series Coupe, Sedan, Convertible and M3 - 1999-2006, E63/E64 - BMW 6 Series and M6 - 2004-2010, E90/E91 - BMW 3 Series Sedan and M3 - 2006-2012, E92/E93 - BMW 3 Series Coupe and M3 - 2007-2013, F30/F31/F34/F80 - BMW 3 Series Sedan and M3 - 2012 and up, F32/F33/F36/F82 - BMW 4 Series Sedan and M3 - 2013 and up,
Warranty + Satisfaction Guarantee
Order with confidence! If you are not completely satisfied with your purchase, you may return it for exchange or refund. This product carries a 1 year manufacturers warranty. See our terms of sale
for full details.
Notes / Warnings
Please check your local laws for ensure legality when using this product on public roads and highways. In areas where this product is not legal for road use it is sold strictly for off-road, track or show use only.