Halo Rings Kit | ||
Advanced Difficulty - Special Tools or Specialized Knowledge May Be Required There are many competitors in the marketplace. Know that you are getting the best reliability of all halo ring manufacturers when you order from Bimmian.com. We carry many alternatives so you can choose the kit that suits you best. To summarize, we carry the best brands of the two major halo technologies, CCFL and LED. In short, they are both about the same brightness - great day and nighttime visibility, and the installation is nearly identical for both kits. Here are the other advantages/disadvantages. CCFL - Positives - Lower price than LED - consistent ring of light, without breaks - great brightness, although LED is a bit brigher CCFL - Negatives - Does not work well under 40 degrees F - ballasts / connectors are sensitive to moisture - glass bulb, which may burn out over time LED - Positives - Works in all weather conditions (great for cold climates) - No ballasts / less connectors for better reliability - does not burn out over time - slightly brighter than CCFL technology LED - Negatives - Higher cost - tiny breaks between LEDs giving the halo a choppy look up close, but from a distance it it very good For LED kits, we currently offer kits from 2 manufacturers, we have the NEW Weisslicht halo rings, and the Mycarr 81 LED kit. The differences between the WeissLicht and MyCarr LED kits are as follows: Ring Size: The WeissLicht LED kit is the first kit on the market for E46 using any technology to utilize two different sized rings. A standard-sized ring is used on the halogen light, while a standard-sized ring is used on the Xenon light. This provides a much nicer - more integrated - look when off. The MyCarr kit uses the same (smaller) sized ring for all four lights. For cars with all-Halogen headlights, we have a kit that features the larger sized ring for all four lights. Choose that at the time of ordering to get the best look for your halogen headlight! LED Size/Quantity: The WeissLicht kit has 66 (small ring) or 74 (large ring) High power LEDs whereas the MyCarr kit has 81 LEDs. The LED size, however, of the WeissLicht rings are larger filling up the ring in a similar way. Installation: WeissLicht LED comes with full plug and play connectors. No cutting of wires is required. MyCarr LED requires splicing of wires for installation. Color: WeissLicht LED is a 7000k slightly blueish xenon color whereas the MyCarr LED is whiter 6000k color. Cost: The WeissLicht LED kit is considerably cheaper, offering a much better value. Why carry both? The MyCarr brand is well established in the marketplace, and until the WeissLicht product was released, was the best kit available. Some customers, through recommendations, still want to get the MyCarr brand, so we continue to offer it even though it is an inferior product in many ways. All kits come with all necessary installation hardware, 4 rings, 2 ballasts (only necessary for CCFL kits), deluxe wiring harness with remote option, connectors, etc., and detailed installation instructions can be found online. To install, follow the provided instructions to open your headlight, the clips to attach the ring to your light housing, run the wires out the back, connect them to the ballasts using the provided connectors, plug the ballasts into the wiring harness and wire the relay to the electrical system. The rings will stay on when the car is on and stay lit for 10 seconds afterwards before turning off automatically. The electrical wiring is pre-assembled in a heat resistant wire harness and plug-and-play connectors for quick installation. Vehicle warranty problems should not arise from the installation of this product as it can be removed without any permanent electrical alterations, however, please verify this with your dealer before installation. The only time consuming and potentially intimidating (but not difficult) element of installation is the taking apart and reassembly of the light lens covers. If you are comfortable doing this then professional installation is unnecessary, as wiring is pre-assembled and wiring instructions are available online. The vast majority of kits are installed by their owners. For E46, the headlights simply clip apart, for vehicles such as e38, e39 and X5, the headlights must be 'baked' apart. For E36 vehicles, these will not go into OEM headlights, only after market headlights which can be taken apart. NOTE: We do not accept returns on any kits which have been installed fully or partially due to the fact that they are un-resaleable. (ie: ends crimped, connectors installed, etc.) Note: CCFL halo kits are sold with a 30 day DOA warranty. After this warranty period, parts are available for purchase inexpensively. Rings are USD$15, ballasts USD$20, and harness USD$25. LED kits are sold with a 1 year manufacturers warranty on parts only. 
| ||
| HOME | CONTACT | INSTALLATION GUIDES | SPECIALS | SPONSORSHIPS | WHOLESALE | YOUR CART |  |
|
 |
 |
 |
 |
 |
 Chosen:  
 |
|
|
|
| |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
