Vorsteiner Carbon Fiber Rear Trunk Lid Spoiler from bimmian.com
Show off the racing heritage of your BMW with this Vorsteiner Aero carbon fiber rear deck lid lip spoiler! This carbon fiber rear lip spoiler mounts to the trunk lid to help create additional downforce and a look straight out of the motorsport catalog.
Features and Benefits Of This Product
Vorsteiner's vision is quite simple: Create the most advanced, innovative, and distinct products in the marketplace to meet the demands of the most discerning clientele. For instance, out lightweight carbon fiber aerodynamic products are uniquely created to enhance to original design light of your vehicle. Our core design philosophy of "understand functional elegance" brings the sporty appearance of your BMW to new heights.
Quality products define the Vorsteiner brand. Each and every part must pass rigorous quality controls before they reach your vehicle. Our customers expect nothing less than the best parts from Vorsteiner. We naturally expect nothing less.
Vorsteiner�s Carbon Fiber Honeycomb Matrix (CFHM) structure gives our parts superior stiffness, strength & durability compared to traditional hand laid carbon fiber and fiberglass materials.
Every Vorsteiner product is rigorously tested and must pass our highly detailed quality control before leaving the on-site Vorsteiner factory. Only after rigorous testing can a part be deemed worthy of the Vorsteiner name. Our clientele expect nothing less than perfection from Vorsteiner, and we welcome and exceed these expectations.
Vorsteiner is a company that was conceived through the imagination of creating the highest quality parts for the most discerning vehicles and clientele. Their relentless pursuit of advancement and perfection is seen not only in their unmatched automotive parts, but also in the hands of carbon fiber craftsmen to create purely sensational parts for the most deserving and elite vehicles.
Benefits of Vacuum CF Technology
- Up to 60% lighter than factory replacement parts.
- Maximizes Power to Weight Ratio.
- Decreases vehicle fuel usage.
- Resistance to Rust & Corrosion in harsh environments.
- Exhibits extremely long life even under extreme conditions.
- Low Percentage of resin content ratio increases strength & weight compared to wet lay production.
- Vacuum compression of carbon fiber parts exhibits more visually stunning looks and uniformity.
What Its Made From
Vorsteiner's Autoclaved Pre-Preg Carbon Fiber structure gives their parts superior stiffness, aerospace strength & durability compared to traditional hand laid carbon fiber composites.
Installation Difficulty: SIMPLE
- No Tools, Anyone Can Install
Complimentary or Alternate ProductsVorsteiner Boot Lid for BMW F01/F02/F03/F04 7 Series
Vorsteiner Carbon Fiber Rear Diffuser for BMW F01/F02/F03/F04 7 Series
for BMW F01/F02/F03/F04 7 Series
Vorsteiner Front Spoiler for BMW F01/F02/F03/F04 7 Series
Vorsteiner Carbon Fiber Rear Trunk Lid Spoiler for BMW F01/F02/F03/F04 7 Series
This Product Fits (see PRICES & ORDERING tab above for clearer detail)
E63/E64 - BMW 6 Series and M6 - 2004-2010, E71 - BMW X6 and X6M SAV - 2008-2014, F06 - BMW 6 Series GranCoupe GC - 2013 and up, F10 - BMW 5 Series Sedan and M5- 2010 and up, F13/F12 - BMW 6 Series Coupe / Convertible and M6 - 2011 and up,
Warranty + Satisfaction Guarantee
Please note that since this is a custom-made product, returns are not accepted unless quality is of a concern in which case an exchange will be made.
Notes / Warnings
Please note that this is a custom made product. Orders will normally ship within 1 to 3 weeks from the time of ordering.
Canadian / International Customers: Due to the size of the box required to transport large parts such as this, after checkout you may be contacted to cover the cost of any additional shipping charges, if applicable.
California Customers: Since this product is made in and shipped from California, California sales tax will need to be collected on all shipments made to California. You will be contacted afterwards to collect this charge.
NOTE: Like all Carbon Fiber and FRP products on the market, this product must be test fitted & prepped before installing it. Often, slight modifications are required such as trimming, sanding, filing, or smoothing the surface in order to get best fitment and appearance. This is NOT an OEM product, fitment will NOT always be perfect straight out of the box. We recommend having this product installed by a company that has experience working with AFTERMARKET body kit pieces, not a standard collision repair center that only works on insurance claims. Images below show an accurate representation of THIS PRODUCT, properly installed by a professional installer. If you are local to the GTA we can refer to a local shop that can handle the install
Please check your local laws for ensure legality when using this product on public roads and highways. In areas where this product is not legal for road use it is sold strictly for off-road, track or show use only.